Ricoh LD260c, Operating Instructions Manual, Page: 43 / 276

2. Basic Copying
This chapter describes the basic procedure for making copies.
Basic Procedure
This section describes the basic procedure for making copies.
• When User Code Authentication is set, enter your user code (up to eight digits) with the number keys
so that the machine accepts copy jobs. For details about Administrator Tools, see “System Settings”,
General Settings Guide.
• When Basic Authentication, Windows Authentication, LDAP Authentication, or Integration Server
Authentication is set, enter your login user name and password so that the machine accepts copy
jobs. Ask the administrator for the login user name and password. For details, see “When the
Authentication Screen is Displayed”, About This Machine.
• To copy onto paper other than plain paper, specify the paper type under Tray Paper Settings in User
Tools. For details, see “System Settings”, General Settings Guide.
1. Make sure "Ready" appears on the screen.
If any other function is displayed, press the [Copy] key on the left side of the control panel.
Initial copy screen
2. Make sure no previous settings remain.
When there are previous settings remaining, press the [Clear Modes] key.
3. Place the originals.
4. Make desired settings.
5. Enter the number of copies with the number keys.
The maximum copy quantity that can be set is 9999.
6. Press the [Start] key.
The machine starts copying.
When placing originals on the exposure glass, press the [ ] key after all originals are scanned.
41
2