Ricoh LD260c Operating Instructions Manual Download Page 242

Page: 242 / 276

Specify the page to be printed with the number keys, and then press [ ].

Press the [Start] key.

• To change the value you entered, press the key you want to change, and then enter a new value.

Printing a specified range

You can print the pages in the specified range alone of the document selected on the Select File screen.

Select the document to be printed.

If a password is set, enter it, and then press [OK].

Press [Print Specified Page].

Press [Specify Range].

Specify the printing start page with the number keys, and then press [ ].

Specify the printing end page with the number keys, and then press [ ].

Press the [Start] key.

• To change the value you entered, press the key you want to change, and then enter a new value.

6. Document Server

240

Summary of Contents for LD260c





















































































































































































































































































Search results

Summary of Contents for LD260c

Reviews:

Ricoh LD260c, Operating Instructions Manual, Page: 242 / 276

Search results

Summary of Contents for LD260c

Reviews: