Ricoh LD260c, Operating Instructions Manual, Page: 240 / 276

• This function can be used only when the Sort function is selected in the printing conditions.
1. Press the [Clear/Stop] key.
2. Press [Change Quantity].
3. Enter the number of sets anew with the number keys.
4. Press the [ ] key.
5. Press [Continue].
Printing will be resumed.
• The number of sets you can enter in step 3 differs depending on when the [Clear/Stop] key is pressed.
Sample Print
When the number of sets is massive, you can print a single set in advance to check the printing order and
the printing conditions of the selected documents.
• This function can be used only when the Sort function is selected in the printing conditions.
1. Select the document to be printed.
6. Document Server
238
6