manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 234 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 234

• To cancel the selection, press the selected (highlighted) key.
• Depending on the security setting, [Access Privileges] may appear instead of [User Name]. For details

about specifying [Access Privileges], consult the administrator.

• For details about how to enter text, see “Entering Text”, About This Machine.

Changing the Password of a Stored Document

You can change the password of a stored document.

1.

Select the document whose password you want to change.

If a password is set, enter it, and then press [OK].

2.

Press [File Management].

3.

Press [Change Password].

4.

Enter a new password, and then press [OK].

5.

For double-check, enter the password again and then press [OK].

6.

Press [OK].

• To cancel the selection, press the selected (highlighted) key.
• Depending on the security setting, [Access Privileges] may appear instead of [User Name]. For details

about specifying [Access Privileges], consult the administrator.

• For details about how to enter text, see “Entering Text”, About This Machine.

Checking the Details of a Stored Document

You can confirm the details of a stored document.

6. Document Server

232

6

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments