Ricoh LD260c, Operating Instructions Manual, Page: 231 / 276

2. Press [File Name].
The soft keyboard appears.
3. Press [Delete All] to delete the document name to be automatically set.
Pressing [Backspace] allows you to delete up to any desired position.
4. Enter a document name, and then press [OK].
• You can enter up to 20 characters for a document name. In the list, however, up to 16 characters are
displayed as the document name. If above limits are exceeded, the list will display up to 15 characters
for the document name.
Specifying a Password
You can specify a password for the stored document.
1. Press [Scan Original].
2. Press [Password].
Using the Document Server
229
6