Ricoh LD260c Operating Instructions Manual Download Page 208

Page: 208 / 276

Connect Copy Display

The display panel shows machine status, error messages and function menus.

Initial copy display

BAT190S

1. [Connect Copy]

Press to switch from the initial copy display to the Connect Copy display.

2. Paper Select

Displays the size, type and orientation of the paper set on both machines.

3. Numbers of originals

Displays the number of originals scanned into memory of the main machine.

4. Number of sets

Displays the number of sets of copies.

5. Number of copies

Displays the number of copies for the main machine.
Press this area to display the total number of copies for two machines.

Display during Connect Copy

5. Connect Copy

206

Summary of Contents for LD260c





















































































































































































































































































Search results

Summary of Contents for LD260c

Reviews:

Ricoh LD260c, Operating Instructions Manual, Page: 208 / 276

Search results

Summary of Contents for LD260c

Reviews: