manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 201 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 201

7.

Select the designation sheet tray that contains the paper for the designation sheets, and then
press the [ ] key.

8.

To specify another page location, repeat step 4 to 7.

Up to 100 locations can be specified.

9.

Select the main sheet tray that contains the sheet to copy the originals.

10.

After making all settings, press [OK] twice.

• When this function is combined with Duplex, the first page of the designated pages is copied on the

front side of a designation sheet.

• The designation sheets should be the same size and orientation as the main sheet.
• To change the value you entered, press the key you want to change, and then enter a new value.

Insert Sheet

You can insert a blank designation sheet before or after a specified page.

BAS121S

• Before using this function, select the tray for slip sheets under Designation Sheet 1 Tray or Designation

Sheet 2 Tray in User Tools. For details, see “System Settings”, General Settings Guide.

1.

Press [Cover/Slip Sheet].

Advanced Copier Functions

199

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments