manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 165 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 165

1.

Press [Edit / Color].

2.

Press [Scan Position].

3.

Specify the scanning position for the front side of the original.

4.

Specify the scanning position for the back side of the original. Then press [OK].

If you don't need to set the scanned position of the back side of the original, press [OK].

• To change the value you entered, press [ ], [ ], [ ] or [ ], or press [Clear], and then specify a new

value.

• Press [ ] and [ ] to set the top or bottom position. Press [ ] and [ ] to set the left or right position.
• The scanning position for the back side of the original is valid only when you are copying 2-sided

originals.

Margin Adjustment

Copies originals leaving a binding margin.

Advanced Copier Functions

163

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments