manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 143 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 143

4.

Enter the number to start counting from with the number keys, and then press [ ].

5.

Press [OK] twice.

• To change the value you entered, press [Clear], and then enter a new value.
• When the Full Color is selected, the full color counter will advance by “1”.
• The default color is black.
• You can enter a number between 1 and 9999.
• You can change the settings for Background Numbering under Stamp in User Tools. For details about

Stamp, see “Copier/Document Server Features”, General Settings Guide.

Changing the stamp color

Changes the stamp color.

1.

Press [Stamp Color] under Stamp Color.

2.

Select the stamp color, and then press [OK].

Preset Stamp

Messages are stamped on copies.

BAT071S

Stamps

141

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments