manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 137 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 137

3.

Enter the length of the original with the number keys, and then press [ ].

You can enter sizes between 1 to 999 mm (0.1 to 99.9 inches) in increments of 1 mm (0.1 inch).

4.

Enter the length of the copy with the number keys, and then press [ ].

5.

Press [OK] twice.

• To change the value you entered, press the key you want to change, and then enter a new value.

Directional Magnification (%)

Specify the horizontal and vertical reproduction ratios, individually.
Copies can be reduced or enlarged at different reproduction ratios horizontally and vertically.

BAT068S

a: Horizontal ratio
b: Vertical ratio

Specifying the ratio with [ ] and [ ]

Specify a ratio using [ ] and [ ].

Advanced Reduce/Enlarge Copying

135

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments