manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 131 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 131

Selecting the Original Type

Select an original type that is suitable for your originals.
There are eight original types available:

Text

For originals that contain mainly text or printed characters.

Photo

For Photographs or pictures.

• Glossy Photo: Use when copying developed photographs
• Printed Photo: Use when copying photographs or pictures that are printed on paper (e.g.

magazines)

• Copied Photo: Use when copying copies or originals generated by color copiers

Text/Photo

For originals that contain both text and photographs or pictures.

Generation Copy

For originals that are copied. The copy image can be reproduced sharply and clearly.

Pale

For originals that have lighter lines written in pencil, or faintly copied slips.

Map

For map originals.

Highlight Pen

For originals marked with a highlighter pen.

Inkjet Output

For originals that are printed by inkjet. Specify the color balance that is closest to that of the original.
There are three settings available.

1.

Select the original type.

Selecting the Original Type

129

4

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments