Ricoh LD260c, Operating Instructions Manual, Page: 124 / 276

• Adjusting the density of primary colors based on a chosen basic color.
• Directly specifying the density of primary colors using the number keys.
• When copying using user colors, the fine shades might vary depending on the condition of the
machine.
• In order to correctly reproduce originals, the values, which have been input, are corrected inside the
machine, and copies are made using the best suitable values. Therefore, there might be slight color
differences when copying using Text and when using Photo.
• Up to 15 colors can be registered.
• Sample prints of user colors can be made on an A4 , 8
1
/
2
× 11 , A3 , or 11 × 17 size paper.
• When printing a list of user colors, the full color counter will advance by “1”.
• For explanations about and examples of what you can do with the color adjustment function, see
“What You Can Do with This Machine <Color Functions/Color Adjustments>”.
• p.3 "What You Can Do with This Machine <Color Functions/Color Adjustments>"
Adjusting colors based on the selected color
Creates colors by adjusting the density of primary colors based on a chosen basic color.
1. Press [Edit / Color].
2. Press [Color], and then press [User Color].
3. Press [Program], and then select the number (01-15) for the color you want to register.
4. Select the color to be used as base color from the basic and user colors.
The density of primary colors for the selected color is displayed.
3. Color Copying
122
3