manualshive.com logo in svg

Ricoh LD260c, Operating Instructions Manual, Page: 121 / 276

Share
Download
Ricoh LD260c Operating Instructions Manual Download Page 121

1.

Press [Edit / Color].

2.

Press [Color], and then press [Adjust Color].

3.

Press [Copy Quality].

4.

Adjust the settings.

5.

Press [OK] twice.

• [Sharp / Soft], [Contrast], and [Background Density] can each be adjusted, however, their

adjustments can affect the level of other adjustment functions.

• The adjusted settings will be deleted and the initial values will be reset, when Auto Clear has been

performed, when the [Clear Modes] key has been pressed or when the power has been turned off.

• For types and examples of the image adjustment functions, see “What You Can Do with This Machine

<Color Functions/Color Adjustments>”.

• p.3 "What You Can Do with This Machine <Color Functions/Color Adjustments>"

Sharp / Soft

Adjusts the outline of an image.

1.

Adjust the image quality by pressing [Soft] or [Sharp].

Adjusting Color and Image Quality

119

3

Summary of Contents for LD260c





















































































































































































































































































Reviews:

No comments