Ricoh Laser AP1600, Setup Manual

Page: 51 / 68

39
4. Installing the Printer Driver
and Software
All of the procedures in this manual assume that you are familiar with general
Windows procedures and practices. If you are not, see the documentation that
comes with Windows.
Auto Run
You can install the PCL6/5e printer driver by using Auto Run.
Auto Run is available for the following operating systems:
• Windows 95/98
• Windows NT 4.0
If the system is Windows 3.1x or a Macintosh, see information on installing the
printer driver.
⇒
P.41 “Windows 95/98 - Installing the PCL 6/5e Printer Driver”
⇒
P.41 “Windows NT 4.0 - Installing the PCL 6/5e Printer Driver”
⇒
P.43 “Windows 3.1x - Installing the PCL 6/5e Printer Driver”
⇒
P.51 “Macintosh”
Important
❒
Before starting this installation, close all documents and applications. In a net-
work environment, confirm that users who are logged on are disconnected.
Be sure to do this when it will create the least interference with other users.
❒
After installing a printer driver, you must restart the computer.
Limitation
❒
If the system is Windows NT 4.0, installing a printer driver by Auto Run re-
quires permission of Administrators. When you install a printer driver by
Auto Run, log on using an account that has Administrators permission.
Reference
For more information about the software and utilities included on the CD-
ROM, see P.4
“Software and Utilities Included on the CD-ROM” .
Note
❒
Auto Run might not automatically work with certain OS settings. In this case,
start "SETUP.EXE" to install the printer driver on the root.
❒
If you want to cancel Auto Run, insert the CD-ROM while pressing the
{
SHIFT
}
key until the computer finishes accessing the CD-ROM.