Ricoh Lanier LD130C, Operating Instructions Manual

Page: 38 / 160

Energy Saving Functions
To reduce its power consumption, this machine has the following functions:
Low Power Mode
• If this machine remains idle for a specified period, it automatically reduces its electrical
consumption.
• The default period the machine waits before entering Low Power Mode is five minutes. This
default time can be changed.
Sleep Mode
• If this machine is already in Low Power Mode and remains idle for a specified period, it
automatically enters Sleep Mode to further reduce its electrical consumption.
• The default delay time the machine waits before entering Sleep Mode is 11 minute. This default
time can be changed.
• The machine can print jobs from computers and receive faxes while in Sleep Mode.
Specifications
Type 1 Type 2 Type 3 Type 4
Reduced Electrical Consumption by
Low Power Mode 97.6 W 106 W 99.0 W 107 W
Time of Switch into Low Power Mode 5 minutes 5 minutes 5 minutes 5 minutes
Time of Switch out from Low Power
Mode 15 seconds 15 seconds 18 seconds 18 seconds
Reduced Electrical Consumption by
Sleep Mode 1.3 W 1.3 W 1.3 W 1.3 W
Time of Switch into Sleep Mode 11 minutes 11 minutes 11 minutes 11 minutes
Time of Switch out from Sleep Mode 34 seconds 34 seconds 45 seconds 45 seconds
• Specifications can vary depending on which options are installed on the machine.
• For details about how to change the default interval, see “Timer Settings”, Network and System
Settings Reference .
• Depending on which Embedded Software Architecture application is installed on it, the machine might
take longer than indicated to enter Sleep Mode.
36