Ricoh IS 2255, General Settings Manual, Page: 60 / 270

System Settings
52
2
Timer Settings
This section describes various items of [ Timer Settings ] under [ System Settings ] .
Default settings are shown in bold type .
❖
Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off". The machine status after the Auto Off operation is referred to as
"Off mode", or "Sleep mode". For the Auto Off Timer, specify the time to
elapse before Auto Off.
The timing is set to "
1 min. " by default.
The time can be set from 10 seconds to 240 minutes, using the number keys.
Auto Off may not work when error messages appear.
❖
Energy Saver Timer
Set the amount of time the machine waits before switching to lower-power
mode after copying has finished or the last operation is performed.
The time can be set from 1 to 240 minutes, using the number keys.
The timing is set to "
1 min. " by default.
❖
Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
The warm up time for making a copy from standby mode is 3 seconds for
Panel off Level 1 and 15 seconds for Panel off Level 2.
•
On
• Off
The time can be set from 10 seconds to 240 minutes, using the number keys.
The timing is set to "
1 min. " by default.
❖
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
•
On
• Off
The time can be set from 10 to 999 seconds, using the number keys
The timing is set to "
60 second(s) " by default.