Network Settings
33
1
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities such as Web Image Monitor, SmartDeviceMonitor for Ad-
min, and telnet.
Note
❒
For details about using Web Image Monitor, see "Using Web Image Monitor",
Network Guide.
❒
For details about using SmartDeviceMonitor for Admin, see "Using SmartDe-
viceMonitor for Admin", Network Guide.
❒
For Details about using telnet, see "Remote Maintenance", Network Guide.
Reference
"Using Web Image Monitor" Network Guide
"Using SmartDeviceMonitor for Admin" Network Guide
"Remote Maintenance by telnet" Network Guide
Interface Settings
Change set values of
[
Interface Settings
]
in
[
System Settings
]
of this machine by us-
ing Web Image Monitor, SmartDeviceMonitor for Admin, and telnet.
❖
[
Network
]
→
[
Machine IPv4 Address
]
→
[
Auto-Obtain (DHCP)
]
• Web Image Monitor:Can be used for specifying the setting.
• SmartDeviceMonitor for Admin:Can be used for specifying the setting.
• telnet:Can be used for specifying the setting.
❖
[
Network
]
→
[
Machine IPv4 Address
]
→
[
Specify
]
→
[
IPv4 Address
]
• Web Image Monitor:Can be used for specifying the setting.
• SmartDeviceMonitor for Admin:Can be used for specifying the setting.
• telnet:Can be used for specifying the setting.
❖
[
Network
]
→
[
Machine IPv4 Address
]
→
[
Specify
]
→
[
Sub-net Mask
]
• Web Image Monitor:Can be used for specifying the setting.
• SmartDeviceMonitor for Admin:Can be used for specifying the setting.
• telnet:Can be used for specifying the setting.
❖
[
Network
]
→
[
IPv4 Gateway Address
]
• Web Image Monitor:Can be used for specifying the setting.
• SmartDeviceMonitor for Admin:Can be used for specifying the setting.
• telnet:Can be used for specifying the setting.
Summary of Contents for IS 2255
Page 102: ...System Settings 94 2...
Page 160: ...Printer Features 152 4...
Page 224: ...Registering Addresses and Users for Scanner Functions 216 6...