Ricoh Interactive Whiteboard Controller Type 2, Operating Instructions Manual

Page: 239 / 344

4. Touch [OK].
• The exported configuration file is protected by a password. It cannot be extended.
Restoring Configuration Settings
The configuration settings can be restored using the Web page of the machine or the Administrator
Settings of the main unit.
When loading the settings from the Web page of the machine, click [Device Settings Management] >
[Upload], and then select the setting information file that is stored on a computer.
When restoring the settings in the Administrator Settings, use the following procedure:
• You cannot restore the settings from a system whose version is lower than 2.2.10200.0.
• You can restore settings to a system whose version is different from the system from which the
settings were backed up if the versions of both systems are 2.2.10200.0 or higher.
• You can restore the settings of other whiteboard models. If the default settings for your whiteboard
are different from those for other whiteboards, you cannot restore the settings.
• When you restore the settings on the Web page and you do not want to load the settings specific
to a device, select the check box for the settings under [Do not import the following device unique
setting value(s) while uploading is being performed].
• Even if the system version of a destination whiteboard is different from that of the source
whiteboard, you can restore the settings. However, if there are setting items that exist in the source
whiteboard that do not exist in the destination whiteboard, or if setting values differ, those settings
are not restored.
1. Save a file containing configuration settings to the root directory (the topmost directory)
of a USB flash memory device.
2. Touch , the Import Device Settings icon.
A confirmation message appears.
3. Insert the USB flash memory device containing the file into a USB port.
Insert only one USB flash memory device.
For details about how to connect a USB flash memory device, see page 31 "Inserting a USB Flash
Memory Device".
4. In response to the message that appears, touch [OK].
If you do not want to import unique device settings, select [The following device unique setting
value(s) will not be imported], and press [OK].
Managing the Device Settings
237