Home
/
Ricoh
/
IM C2000 Series
/
User Manual

Ricoh IM C2000 Series, User Manual, Page: 167 / 396

Share

Page: 167 / 396

Ricoh IM C2000 Series User Manual Download Page 167

6. Document Server

Storing Documents in Document Server

You can store documents scanned by the machine in the document server.
You can also store them using the printer driver.
See "Storing Documents to Print in the Machine", User Guide (Full Version).

• Documents stored in the document server are deleted after three days (72 hours) in the factory-

default configuration. Change the settings in [Auto Delete File in Document Server] to change the
period until documents are deleted or to specify not to delete documents automatically.

• See "Changing the Storage Period of Document Server or Specifying an Indefinite Period", User

Guide (Full Version).

1.

On the Home screen, press [Document Server].

2.

On the document server screen, press [To Scanning Screen].

DZX233

3.

Specify the folder to store documents, the document name, and other settings.

DZX234

165

«
...
165
166
167
168
169
...
»

Summary of Contents for IM C2000 Series













































































































































































































































































































































































































Reviews:

No comments