manualshive.com logo in svg

Ricoh IM 550 Series, User Manual, Page: 212 / 344

Share
Download
Ricoh IM 550 Series User Manual Download Page 212

Replacing the Waste Toner Bottle

The waste toner bottle needs to be replaced when the "Waste Toner Bottle is almost full." message is
displayed.
See "Checking Inquiry Information", User Guide (Full Version).

Watching the Video for Replacing the Waste Toner Bottle

See the video displayed on the control panel of the machine for the procedure to replace the waste
toner bottle.

1.

Press [Watch Video].

EAT714

To display this screen again, press [Check Status] and then press [Check] under "Mach. Status" on
the [Mach./Applic. Stat] tab.

2.

Press the play key.

3.

Replace the waste toner bottle by following the procedure shown in the video.

8. Adding Paper and Toner

210

Summary of Contents for IM 550 Series

























































































































































































































































































































































Reviews:

No comments