Ricoh IM 2500 Series, User Manual

Page: 64 / 400

Placing an Original on the Exposure Glass
Use the exposure glass to scan originals that cannot be placed in the auto document feeder (ADF), such
as books and license cards.
• When lowering the ADF, do not place your hands on the hinges and exposure glass. Your
hands or fingers are caught, which can result in injury.
• Do not lift the ADF forcefully. The cover of the ADF might open and cause injury. The ADF, or its
hinges may also become damaged.
1. Lift the ADF or the exposure glass cover.
Lift the ADF or the exposure glass cover by more than 30 degrees to detect the document size
automatically when placing an original on the exposure glass.
2. Place the original face down and aligned to the mark on the upper left corner of the scan
area.
DZW102
page 213 "Recommended Original Size and Weight"
page 215 "Sizes Detectable with Auto Paper Select"
3. Lower the ADF or the exposure glass cover.
• When you place a thick book or three-dimensional original on the exposure glass and lower the
ADF, the back side of the ADF rises up to accommodate the original.
2. Getting Started
62