Ricoh IM 2500 Series, User Manual

Page: 363 / 400

Specifications for IEEE 1284 Interface Board
Item Specifications
Transmission spec IEEE 1284
Required cable Standard IEEE 1284 compliant Micro Centronics 36 pin cable
Specifications for Wireless LAN Board
• Note that the available channels (frequency ranges) and locations to use the wireless LAN are
subject to the regulations of the country or region where the printer is used. Be sure to use the
wireless LAN according to the applicable regulations.
Item Specifications
Transmission spec Based on IEEE 802.11a/b/g/n (wireless LAN)
Transmission rate • 2.4 GHz band: 130 Mbps (maximum)
• 5 GHz band: 300 Mbps (maximum)
Frequency range (Center
Frequency) • 2412–2472 MHz (1–13 channels)
• 5180–5240 MHz (36, 40, 44, and 48 channels)
• 5260–5320 MHz (52, 56, 60, and 64 channels)
• 5500–5700 MHz (100, 104, 108, 112, 116, 120, 124, 128,
132, 136, and 140 channels)
Transmission mode • Infrastructure mode
• Direct Connection Mode
• Direct Connection: Group Owner Mode
• Web Image Monitor is supported.
• The transmission rates of 300 Mbps in the 5 GHz band and 130 Mbps in the 2.4 GHz band are
the theoretical values of the wireless LAN specification. The actual transmission rate may be lower,
depending on the operating environment.
• The connecting channel is determined by the channel that is used as the access point.
List of Specifications
361