Ricoh HL-F1, Field Service Manual

Page: 183 / 296

• Selector 7: Non-ring reception
Setting this selector to "1" makes the machine receive calls without ringer sound if the Ring Delay is
set to 0.
WSW18 (Function setting 3)
Selector No. Function Setting and Specifications
1 Not used. -
2
3
Detection enabled time for CNG and no
tone
No. 2 3
0 0 : 40 sec.
0 1 : 0 sec. (No detection)
1 0 : 5 sec.
1 1 : 80 sec.
4
5
Not used. -
6 Registration of station ID 0: Permitted 1: Prohibited
7
8
Tone sound monitoring
No. 7 8
0 X : No monitoring
1 0 : Up to phase B at the calling station
only
1 1 : All transmission phases both at the
calling and called stations
• Selectors 2 and 3: Detection enabled time for CNG and no tone
After the line is connected via the external telephone or by picking up the handset of the machine, the
machine can detect a CNG signal or no tone for the time length specified by these selectors.
The setting specified by these selectors becomes effective only when selector 8 on WSW20 is set to
"1."
• Selector 6: Registration of station ID
Setting this selector to "0" permits the registration of station ID for Austrian and Czech models.
• Selectors 7 and 8: Tone sound monitoring
These selectors set monitoring specifications of the tone sound inputted from the line.
Firmware Switches (WSW)
181
5