Ricoh GWD2004 Operating Instructions Manual Download Page 46 | Manualshive

Page: 46 / 190

Ricoh GWD2004 Operating Instructions Manual Download Page 46

Placing Originals

28

1

Setting the Carrier Sheet

Use the carrier sheet when copying originals listed in “Originals that should be scanned
using the carrier sheet”, such as originals drawn in pencil, and pasted originals.

Important

❒

When using the optional carrier sheet, set the original output location to orig-
inal rear output. If the original output location is set to original upper output,
the original may be damaged.

A

Open the carrier sheet with the transparent sheet face up, and then insert
the original also face up.

Align the original with the fold of the carrier sheet.

B

Using both hands, hold the carrier sheet face down, and carefully insert the
folded edge of the carrier sheet into the insertion area.

Note

❒

When using the carrier sheet with Synchro Cut, the paper is cut to the size
of the carrier sheet.

Reference

p.17 “Originals that should be scanned using the carrier sheet”

ZEDP020J

ATZ027S

«
...
44
45
46
47
48
...
»

Summary of Contents for GWD2004































































































































































































Reviews:

No comments