Ricoh GR Digital II Operating Manual Download Page 99

Page: 99 / 186

Pla

yback F

unc
tions

Organizing Files

Deleting Files

Deleting One File

Display the image to delete in playback mode.

Press the

button.

Press the

buttons to select

[Delete One].

You can change the image with the

but-

tons.
For images taken with

, [Delete

RAW+JPEG], [Delete JPEG Only], and [Delete

RAW Only] can be selected.

Press the MENU/OK button.

The image is deleted.
To delete another image, repeat Steps 3 and 4.
To end the process, select [Cancel].

Deleting All Files

Press the

button in playback mode.

Press the

buttons to select [Delete All] and then press the

MENU/OK button.

The deletion confirmation screen appears.

Press the

button to select [Yes], and then press the MENU/OK

button.

Deleting Multiple Files Simultaneously

Press the

button in playback mode.

When in 20-image or 81-image view, proceed to Step 3.

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands