Ricoh GR Digital II Operating Manual Download Page 76

Page: 76 / 186

Various S

hooting F

unc
tions

Shooting Continuously with Varied Exposure Values

In [Auto Bracket] of the [Shooting] menu, select [AE-BKT 1/3EV]

or [AE-BKT 1/2EV], and then press the

button.

The [AE Bracketing Settings] screen appears.

Press the

buttons to select from

the first through third image, and

then press the

buttons to set

the exposure value.

Press the MENU/OK button twice.

The shooting screen reappears.

Shooting While Merging Images Together (Multiple Ex-

posure Shooting)

The camera takes images while merging them together. Up to five images

can be merged.

In the [Shooting] menu, select [Multiple Exposure Shooting],

and then press the

button.

The [Multiple Exposure Shooting] screen appears.

Press the

buttons to select

items, and then set the selected

item to [On] or [Off].

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands