Ricoh GR Digital II Operating Manual Download Page 168

Page: 168 / 186

ppendic

166

Optional Accessories

Conversion Lens, Hood, and Adapter

Remove the ring cap before attaching the conversion lens (GW-3) or the lens

hood and adapter (GH-3).

Removal

Turn the camera off and rotate the cap counterclockwise until it can be re-

moved.

Attachment

With the camera turned off, align the mark-

ing on the ring cap (

) with the marking on

the camera body (

), and turn the ring cap

clockwise until it clicks.

Note -----------------------------------------------------------------------------------------------------------

• Set [Conversion Lens] of the [Setup] menu to [Wide] when using the conversion lens.

Summary of Contents for GR Digital II



























































































































































































Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands

Ricoh GR Digital II, Operating Manual

Search results

Summary of Contents for GR Digital II

Reviews:

Related manuals for GR Digital II

Brands by name

Popular brands