Ricoh Gestetner DSm7110, Operating Instructions Manual, Page: 164 / 232

Copying
144
2
D
Press the program number you want to store.
E
Enter the program name.
You can enter up to 40 characters.
F
Press [ OK ] .
The screen returns to the program screen, showing the program number followed by
the program name. The screen returns to the initial copy display after a short time.
Note
❒
Program numbers with
m
against them already have settings made for them.
Changing a Stored Program
Changes program settings.
A
Check the program settings.
B
Set the contents of a program.
C
Press the
{
Program
}
key.
D
Press [ Program ] .
E
Press the program number you want to store.
F
Press [ Yes ] .
G
Enter the program name.
You can enter up to 40 characters.
H
Press [ OK ] .
The screen returns to the program screen, showing the program number followed by
the program name. The screen returns to the initial copy display after a short time.
Note
❒
When you want to check the contents of a program, recall the program.
❒
When it is overwritten, the previous program is deleted.