Ricoh Gestetner 5450, Service Manual, Page: 136 / 315

INSTALLATION PROCEDURE 1 July, 1998
3-16
3.2.3 INTERFACE BOARD (OPTION)
NOTE: The interface board is originally installed in the U.S.A and European
version models as a standard part, not an option.
1. Remove the rear cover and the right rear cover.
2. Install the I/F board [A] in CN102 on the MPU (2 screws).
3. Connect the cable [B] (accessory) to the I/F board.
4. Attach the connector [C] at the opposite end to the connector bracket (2
screws).
5. Cut away the blindfold cover [D] on the right rear cover.
A628O033.WMF
A628O034.WMF
[A]
[B]
[C]
[D]