19
CAUTION : If during copying your original gets stuck in the copier, press
the Emergency Stop key.
If you stop the operation by pressing this key, remove both the
original and paper.
COPYING ONTO ROLL PAPER (OPTION)
To make a copy using the Roll Feeder option, you do not need to set paper on the copy table; the
paper will be fed to the copier from the Roll Feeder. You can copy onto roll paper using the
following techniques:
•
Synchro cutting
•
Preset cutting
•
Variable cutting
Notes
p
If unused roll paper is left in the copier, cut 700mm (28") from the edge of the paper before you
start copying.
p
When you want to copy long originals, the curled originals, or thin originals (less than 0.1mm)
which can be easily bent down, open the guide to keep the original away from the paper
entrance.
SM058