Ricoh FT8680OM, Operating Instructions Manual

Page: 36 / 160

SETTING A STACK OF ORIGINALS IN THE
DOCUMENT FEEDER (ADF, ARDF)
You can insert a stack of originals (one-sided or two-sided) of the same size
into the document feeder. These originals are individually fed onto and
removed from the exposure glass.
❐ If you want to set originals of different sizes at the same time, set different
sized originals feeding mode using the User Tools.
☛
See page 120.
❐ If you want to use originals that are not recommended for this mode, do the
following:
First make one set of copies of originals by positioning them on the exposure
glass directly, then use these copies as originals.
1.
Correct any curl, fold, or crease
in the originals before setting the
originals.
2.
Confirm that the Insert Original
indicator is lit before setting the
originals.
3.
Confirm that no previous originals
remain on the exposure glass.
4.
Adjust the guide to the original
size.
tb-eu-4
SETTING A STACK OF ORIGINALS IN THE DOCUMENT FEEDER (ADF, ARDF)
28