Ricoh Fiery E-820, Configuration Manual

Page: 82 / 190

4
4-24 Performing Setup from the Control Panel
Service Setup options
PServer is a program in the E-820 software that can service the Novell print queues
assigned to the Novell print servers you have set up for printing to the E-820. When
you choose PServer Setup and enable PServer, you can set up NDS (Novell Directory
Services), Bindery Services, or both. NDS is used with NetWare 4.x/5.x; Bindery
Services are used with NetWare 4.x/5.x in bindery emulation mode.
LPD Setup options
PServer Setup options
Network Setup
Service Setup
LPD Setup
Enable LPD
Yes/No [Yes]
Select Yes to allow lpd printing. For more information, see “Setting up the E-820
on TCP/IP networks” on page 2-18.
Network Setup
Service Setup
PServer Setup
Enable PServer
Yes/No [No]
Select Yes if you have a Novell network connected to the E-820.
Choose NDS Setup if your network uses NetWare 4.x/5.x in native mode.
Choose Bindery Setup if your network uses NetWare 4.x/5.x in bindery emulation
mode.
If your network uses both NDS and Bindery, set up NDS first. If you set up NDS
after Bindery, you will overwrite Bindery Setup.
If your network uses both NDS and Bindery, and uses NetWare 4.x/5.x servers in
bindery emulation, note that the E-820 cannot service NDS and bindery emulation
servers on the same NDS tree.
Exit PServer Setup
NDS Setup
Bindery Setup
Polling Interval
PServer Setup