4
4-1
E-820 Setup from the Control Panel
Setup is required the first time the E-820 is turned on after new system software is
loaded. In this initial Setup, you (or the service technician who loads the software)
choose the language to use for E-820 Control Panel menus and messages. If you do
not configure a particular Setup option, the E-820 uses default settings. Make sure
the settings are appropriate for the printing environment at your site.
E-820 Setup from the Control Panel
Setup performed from the Control Panel configures the E-820 to communicate with
other devices and manage print jobs sent to it.
Setup provides these groups of options:
• Server Setup to specify system options
• Network Setup to specify all the active network systems that transmit print jobs to
the E-820
• Printer Setup to specify how print jobs and queues are managed
• PS Setup to specify PostScript settings
• Color Setup to specify color settings
• Job Log Setup to specify how the E-820 handles its log of printed jobs
The Change Password option in the Setup menu allows you to create and change the
Administrator password on the E-820.
The Control Panel on the front of the E-820 allows you to set options and view
information about jobs printed to the E-820. It comprises the following parts:
• Activity light—indicates normal or problem activity
• Line selection buttons—select a setting and proceed to the next option
• Display window—shows status information and options for setting up the E-820
Chapter 4:
Performing
Setup from
the Control
Panel
