7
7-5
Clearing the E-820
T
O
SET
OR
CHANGE
A
PASSWORD
1.
Select the password you want to change.
2.
Type the password in both the Enter New Password and Verify New Password fields.
Passwords are case-sensitive and can be any combination of letters and numbers up to
19 characters. You must enter the password
exactly
the same way both times. The new
password remains in effect until you change it.
T
O
REMOVE
A
PASSWORD
1.
Select the password you want to delete.
2.
Delete the asterisks (*) in both the Enter New Password and Verify New Password
fields.
If you forget the Administrator password, contact your authorized service
representative to reinstall E-820 system software. This clears the Administrator
password and allows you to set a new one.
Clearing the E-820
The Clear Server command allows you to clear all queued print jobs from the E-820—
jobs in the E-820 Print, Hold, and Printed queues. Jobs can also be deleted, either
individually or as a group, using the job management tools. Clear Server also clears all
jobs archived on the E-820 hard disk, the index of archived jobs, and finally, all
FreeForm
™
masters and the index of FreeForm masters.
To clear the E-820, scroll through the Functions menu and choose Clear Server. You
are asked to confirm your selection. If the Administrator password has been set, you
are prompted to enter it.
N
OTE
:
To clear the E-820 without using the E-820 Administrator password, you must
log in to Windows NT as Administrator, and use Clear Server from either the FieryBar
menu or the Command WorkStation Server menu.
