Ricoh DX 3243, Operating Instructions Manual

Page: 70 / 144

Printing Functions
64
3
B
Use the
{U}{T}
keys to select Skip
Feed, and then press the
{
OK
}
key.
C
Press the
{
Start
}
key.
A3 Paper Feed
This machine can print on A3 size pa-
per.
Note
❒
Although printing on A3
L
size
paper is possible, the maximum
possible size of the printed image
is as follows:
• Type 1 (A4 drum) model: 210
×
288 mm
• Type 2 (B4 drum) model: 250
×
355 mm
❒
If you print A3 L size originals on
A3
L
paper at 100% magnification,
areas of the printed image will be
missing.
❒
The horizontal (upper and lower)
image position are fixed at -20 mm
(Type 1: A4 drum) / -10 mm (Type
2: B4 drum). The vertical (left and
right) print margins can each be
adjusted by approximately 1 mm.
❒
Print speed is limited to 80 cpm.
❒
The following paper weights are
available for A3 Paper Feed.
• Type 1 (A4 drum) model: 52.3
g/m
2
and 81.4 g/m
2
• Type 2 (B4 drum) model: 52.3
g/m
2
and 157 g/m
2
❒
The A3
L
output tray can store up
to 500 sheets of 64 g/m
2
(20 lb) pa-
per.
❒
To load A3
L
size paper, the Side
pads and Side plate guides must
first be removed.
❒
Skip Feed Printing is not possible
when printing on A3
L size paper
❒
A3 Paper Feed cannot be regis-
tered to Memory mode.
❒
When the Hold Data-in mode is off,
the A3 Paper Feed function cannot
be used. When using the A3 Paper
Feed function for online printing,
set Hold Data-in mode to on after
Master Making, and then specify
A3 Paper Feed to print.
A
Press the
{
Skip Feed/A3 Paper Feed
}
key.
B
Use the
{U}{T}
keys to select A3
Paper Feed, and then press the
{
OK
}
key.
ANT015S
BFU001S