Ricoh DX 3243, Operating Instructions Manual

Page: 45 / 144

Auto Cycle
39
2
Original Type
Select one of the following four types
to match your originals:
❖
Text
Specify this if the original docu-
ment consists primarily of text.
❖
Text/Photo
If the original document contains a
combination of text and photo-
graphs, it is printed using the opti-
mum image balance.
❖
Photo
Specify this for photographs, pic-
tures, or coloured documents.
❖
Pale
When printing pale colours, the
master is created using pale colour
print.
❖
Pencil
Specify this for originals drawn /
written in pencil.
Note
❒
You can specify the original type
that is selected by default when the
power is turned on. See “Original
Type” on p.112 “4 Initial Settings”.
❒
The default is Text mode.
❒
Moire patterns may occur when
you are printing from screened
originals.
❒
When using Photo mode to print
originals with both text and photo-
graphs, the text might appear faint.
To avoid this, use Text/Photo
mode instead.
❒
When using Pencil mode, set docu-
ments drawn / written in pencil on
the exposure glass.
A
Press the
{
Original Type
}
key.
B
Use the
{U}{T}
keys to select the
type of original, and then press
the
{
OK
}
key.
ANT016S