Ricoh DX 3243, Operating Instructions Manual

Page: 27 / 144

Print Paper
21
1
Print Paper
The following limitations apply:
*1
For details about how to print on A3 L , see p.64 “A3 Paper Feed”
Note
❒
Paper with a thickness of 47.1 - 209.3 g/m
2
can be used. However, when using
a thickness less than 52.5 g/m
2
or greater than 81.6 g/m
2
, it is advised to select
printing speed to setting 1.
❒
About 1,000 sheets of paper with a 64 g/m
2
thickness is the standard amount
that can be set in the paper feed tray. This amount changes depending on the
paper thickness. In general, set paper at a height less than 105 mm.
❒
When using paper that easily curls or waves in humidity, if there is high hu-
midity (more than 80%), set less than 500 sheets in the paper feed tray.
❒
Paper with a length of 90 - 297 mm and width of 140 - 420 mm can be set in
the paper feed tray. However, when using a paper size that exceeds 275 mm
length and 395 mm width, specify A3 Paper Feed. Specifying this function
sets the printing speed to 80 cpm and the print position to -20 mm (Type 1: A4
drum) / -10 mm (Type 2: B4 drum).
❒
Do not use curled or waved paper. Use paper with less than 5 mm curl and 3
mm wave.
❒
When paper feed problems arise, try using a slower print speed.
Paper Size Paper
Weight
Metric Inch
Paper feed tray A3
L
*1
, B4 JIS
L
, A4
L
,
B5 JIS LK , A5 L , B6 JIS L ,
A6 L
Others (Vertical: 90 - 268 mm,
Horizontal: 148 - 388 mm)
8
1
/
2
"
×
14"
L
, 8
1
/
2
"
×
11"
L
,
5
1
/
2
"
×
8
1
/
2
"
LK
, 8"
×
13"
L
Others (Vertical: 3.6" - 10.5",
Horizontal: 5.9" - 15.2")
47.1 - 209.3
g/m
2
,
12.5 - 55.6 lb