Ricoh DD 5450, Field Service Manual, Page: 67 / 403

２
65
Chapter 2 Tape Dispenser Type D1
Connect the 4-pin connector of the tape dispenser
to the “top connector for option” of the machine
and the 6-pin connector to the “third connector for
option”.
A housing is inserted in the 4-pin connector of the
tape dispenser cable for the purpose of insulation.
Pull it out and dispose of it.
Connect the earth wire with the screw (4×6).
4-pin connector
6-pin connector
(4) Setting Tape Roll
The LED on the tape dispenser unit flashes
when the unit runs out of the tape.
"TAPE DISPENSER EMPTY OPEN TAPE
DISPENSER COVER" is displayed on the
operation panel.
REFERENCE
1. Open the cover of the tape d ispe nser unit.
6
6. Remove the two screws to remove the
connector cover.
Connector cover
7. Connect the cables of the tape dispenser to
the connectors for option.
Make sure to connect the earth wire.
IMPORTANT