Ricoh DD 5450, Field Service Manual, Page: 355 / 403

353
８
Chapter 8 HELP Mode Function and Operation Procedures
● Operation procedure
1.
Call the HELP mode “H-047”.
● Adjustment.
M-MAKE HORIZONTAL START POS. : ONLINE
M-MAKE VERTICAL START POS. : ONLINE
Online Master Making Adjustment
HELP-047
2.
Adjust the online master making.
3.
Adjustment
1. Select and touch the item to be adjusted.
2. Enter the value by the NUMERIC keys or change the
value by the PRINT POSITION
keys.
● Press the HOME key to invert "+"and "-"of the
selected set value.
● Press the C (clear) key to return the selected set
value to the value before change.
3. Press the
X
=
key to store the set value.
Return to the HELP mode.
+0.0
+0.0
M-MAKE HORIZONTAL START POS. (mm): ONLINE
M-MAKE VERTICAL START POS. (mm): ONLINE
1.
2.
HELP-047
+0.0
+0.0
1.
2.
HELP-047
+0.0
+0.0
1.
2.
Press the STOP key.
The HELP mode selection display will reappear.
Enter “ 047 ” by the NUMERIC keys and then press the
PRINT key.
→ To exit the HELP mode : Turn the power switch OFF.
→
To access another HELP mode : Enter the desired mode number
using the numeric keys.
M-MAKE HORIZONTAL START POS. (mm): ONLINE
M-MAKE VERTICAL START POS. (mm): ONLINE
M-MAKE HORIZONTAL START POS. (mm): ONLINE
M-MAKE VERTICAL START POS. (mm): ONLINE
3