Ricoh DD 5450, Field Service Manual, Page: 344 / 403

342
８
Chapter 8 HELP Mode Function and Operation Procedures
Page 1: Paper feed speed
Page 2: Paper feed angle
Page 3: Paper feed lead edge sensor angle
Page 4: Paper feed limit angle
HELP-039
098
152
169
198
262
382
432
209
1.
2.
3.
4.
5. 6.
7.
8.
● To enter H-039, be sure to set G=1 of HELP-061 -5 .
Paper Feed Adjustment
(5 pages in total)
HELP-039
PAPER FEED SPEED
098
152
169
198
262
382
432
209
1.
2.
3.
4.
5. 6.
7.
8.
Page 5: Paper feed loop level
Unchangeable
1.
● Operation procedure
Call the HELP mode “H-039”.
2.
Make sure that the master is wound around the drum. Then
enter “ 039 ” by the NUMERIC keys and then press the PRINT
key.
Change the screen.
Touch the arrow on the screen lower right four times to switch
to Page 5.
Touch
●Do not change the values on Page 1 - 4.
3.
HELP-039
046
046
040
042
040
039
033
046
33.
34.
35.
36.
37. 38.
39.
40.
Set value display (screen 5).
Paper feed loop levels are displayed.
Adjustment
1. Select and touch the speed to be adjusted.
2. Enter the value by the NUMERIC keys or change
the value by the PRINT POSITION keys.
► Speed reference values
Item Speed Default (rpm)
33 JOG Speed 46
34 Speed 0 46
35 Speed 1 40
36 Speed 2 42
37 Speed 3 40
38 Speed 4 39
39 Speed 5 33
40 Speed 6 46
● Press the C (clear) key to return the selected set value to
the default.
3. Press the
X
=
key to store the set value.
4.
Return to the HELP mode.
HELP-035 to HELP-038: unused
PAPER FEED SPEED
PAPER FEED LOOP LEVEL
Press the
STOP
key.
The HELP mode selection display will reappear.
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number
using the numeric keys.
3