Ricoh DD 5450, Field Service Manual, Page: 217 / 403

４
215
Chapter 4 Paper Ejection Section
1. Remove the paper ejection base.
2. Remove the timing belt.
3. Remove the two screws to remove the paper
ejection motor.
(Pan head screw with spring plain washer 3 x 6)
Reinstallation
Screw
Connector
Paper ejection
jam sensor
Timing belt
Screws
Screws
Connector
→See (3) above
6
5. Disconnect the connector to remove the base
plate.
6.
Remove the screw to remove the paper
ejection jam sensor with the bracket.
7. Remove the paper ejection jam sensor from
the bracket.
● Take note of the direction to install the paper
ejection jam sensor.
(6) Removing the Paper Ejection Motor
IMPORTANT