Ricoh DD 5450, Field Service Manual, Page: 212 / 403

210
４
Chapter 4 Paper Ejection Section
6 Paper Ejection Section
(1) Removing the Paper Stripper Finger, Sub Paper Stripper Finger
1. Open the master ejection box.
2. Remove the three screws.
(Tree places: one screw each)
(Pan head screw with spring plain washer 3 x
10)
3. Remove the paper stripper finger and two
sub paper stripper fingers from the shaft.
4. Take out the paper stripper finger and sub
paper stripper fingers from the pipe.
● Adjust the paper stripper finger after it is
installed.
Reinstallation
→See Page 167
Sub paper stripper fingers
Pipe
Paper stripper finger
Pipe
6
IMPORTANT