Ricoh DD 5450, Field Service Manual, Page: 191 / 403

４
189
Chapter 4 Scanner Section
(6) Removing the Slider A
Scanner R bracket
Screws
Screws
Screws
1. Remove the scanner unit.
2. Remove the eight screws to remove the
scanner R bracket.
(S tight hexagon head WH rounded end screw
3 x 6)
3. Remove the LED lamp unit.
4. Turn the timing pulley, and move Slider A to the
position shown in the figure.
● Do not move the Slider A with hand.
5. Loosen the two screws to remove the Slider A.
(Pan head screw with spring plain washer 3 x
10)
● Take note that the wire is not hitched.
Slider A
Slider A
Screws
Screws
→See (3) above
→See (4) above
2
Timing pulley
IMPORTANT
IMPORTANT