Ricoh DD 5450, Field Service Manual, Page: 185 / 403

４
183
Chapter 4 Exterior
1. Remove the control panel.
2. Widen the claws of the switch to remove the
socket.
Reinstallation
→See (6) above
1
● Always remove the power cord plug from
the outlet before replacing the switch.
WARNING
● When replacing the LED, remove the LED
from the socket.
3. Remove the nut and the washer to remove the
power switch.
(10) Removing the Power Switch
● Attach the power switch in the correct
direction as shown in the right figure.
● Attach the washer with the correct side.
● Attach the power switch so that it is located
in the center of the hole of the control panel
cover.
REFERENCE
IMPORTANT
LED
Nut
Socket
Socket
Direction of washer
Claw
Claw
Direction of power
switch