Ricoh Da-P1, Field Service Manual

Page: 451 / 452

Test Pattern Printing
Test Pattern Printing
Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design
testing.
• Do not operate the machine until the test pattern is printed out completely. Otherwise, an SC
occurs.
1. Enter the SP mode and select SP2-109-001.
2. Select the number for the test pattern that you want to print and press [OK].
3. Print the test pattern with SP2-109
SP2-109-002 1 Sheet Printing
SP2-109-003 Continuous Printing
SP2-109-004 Print Side Select
4. Check the output.
SP2-109-001 Pattern list
0 None 9 Arg. Grid20mm
1 Vert. (1dot) 10 Indep. (1dot)
2 Hori. (1dot) 11 Indep. (2dot)
3 Vert/ (2dot) 12 Indep. (4dot)
4 Hori. (2dot) 13 Full
5 Grid Vert. 14 Band
6 Grid Hori. 15 Gray 10mm
7 Grid 20mm 16 Gray 20mm
8 Arg. Grid 17 Trim Area
Test Pattern Printing
151