Ricoh D5510, User Manual

Page: 42 / 52

• A Phillips screwdriver or coin is required to mount the pen tray. Select the proper tool according to
location in which the main unit is installed.
• When removing the main unit from the stand or wall, make sure to remove the pen tray first.
Connecting the Power Cord
Notes for users in North America
• Connect the supplied 120 V cable to the 120 V power supply.
Notes for users in EU and other areas
• Connect the supplied 220 – 240 V cable to the 220 – 240 V power supply.
For users in Norway, this product is also designed for an IT power distribution system with phase-to-
phase voltage of 230V.
• Do not use any frequencies other than those that match the specifications shown. Doing so could
result in fire or electric shock.
• Avoid using an extension cord or power strip when possible. Doing so could result in fire or
electric shock.
• If for some reason you must use an extension cord or power strip, make sure the total power
consumption of the connected devices does not exceed the power rating of the extension cord or
power strip. If the total power consumption exceeds the specified power rating, the connected
devices might become damaged or cause a fire.
• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords
that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.
• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and
electric shock hazard.
• The supplied power cord is for use with this machine only. Do not use it with other appliances.
Doing so could result in fire or electric shock.
3. Setting Up the Machine
40