Ricoh Caplio RX, Operation Manual

Page: 27 / 183

27
1
• On the setting selection screen, the item with the orange „ dis-
played is the current setting. Even if you change the setting by mov-
ing the blue indicator, until you finalize the setting the orange
indicator remains to show what the previous setting was.
• The menu screen sequence slightly varies with the item for which
the setting change is being made. For the detailed explanation of
each item, see the corresponding page.
The Basics of the Setup Screen
The sequence of operations slightly varies with the item for which the setting change is being made.
For the detailed explanation of each item, see the corresponding page.
Operation
To display the Setup
Screen:
1.
Turn the Mode Dial to
1
1 1
1
(Setup Mode).
The Setup Screen is displayed.
To select an item:
1.
Press the
!" !" !" !"
buttons to select the desired item.
To select a setting value:
1.
Press the
#$ #$ #$ #$
buttons to select the desired item.
When you have selected
[EXECUTE]:
1.
Press the
O O O O
button.
2.
The following screen is displayed, so make the
necessary settings.
To close the Setup
Screen:
1.
Switch the Mode Dial to another mode.