manualshive.com logo in svg

Ricoh Caplio RX, Operation Manual

Share
Download
Ricoh Caplio RX Operation Manual Download Page 13

13

1

• Other batteries, such as manganese dry 

cell (R6) and Ni-Cd, cannot be used.

• With AA Alkaline Batteries (LR6), the num-

ber of shots may differ depending on the 
batteries.

• Please remove the batteries if you are not 

going to use it for a long period of time.

Using the Rechargeable 
Battery

The rechargeable battery (DB-43) is another 
option for powering this camera. This battery 
is convenient because it can be used over 
and over again by recharging, and the bat-
tery power lasts long.

Inserting the Rechargeable Battery

1.

Make sure the camera power is
off.

2.

Open the battery/card cover.

The cover slides open in two steps.
First slide the cover toward the face of 
the camera, then lift it to expose the bat-
tery compartment.

3.

Insert the rechargeable battery.

4.

Close the battery/card cover and 
slide it back into place.

Removing the Rechargeable Bat-

tery

If you have already used this camera, make 
sure it is turned off before removing batteries.

1.

Make sure the camera power is
off.

2.

Open the battery/card cover.

The cover slides open in two steps.
First slide the cover toward the face of 
the camera, then lift it to expose the bat-
tery compartmen

3.

Remove the  rechargeable bat-
tery.

Label

Summary of Contents for Caplio RX
























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands