Ricoh Bc-C1, Field Service Manual, Page: 142 / 268

Adjustment after Replacement
Printing
• Make sure the paper is installed correctly in each paper tray before you start these adjustments.
• Print the registration page (page 186 "Test Pattern Printing") to use for these adjustments.
Registration - Leading Edge/Side-to-Side
A: Leading edge registration (3 ± 2 mm)
B: Side-to-side registration (2 ± 1.5 mm)
1. Check the leading edge registration [A] for each paper feed station, and adjust them
using SP1-001.
Tray SP No. Threshold
Tray: Plain SP1-001-002 4.2 ± 1.5 mm
Tray: Mid Thick SP1-001-003
Tray: Thick SP1-001-004
Bypass: Plain SP1-001-007
Bypass: Mid Thick SP1-001-008 4.2 ± 1.5 mm
Bypass: Thick SP1-001-009
4. Replacement and Adjustment
140