Ricoh Bc-C1, Field Service Manual, Page: 100 / 268

3. Stepped screw [B]
4. Charge roller [C] and cleaning brush [D] (with the holders and springs)
• Turn the gear [E] (as necessary) so that the rear holder [F] comes out.
5. When reassembling, adjust the image quality ( page 101 ).
Cleaning Blade
1. Charge roller ( page 97 )
2. Cleaning blade [A] ( x 2)
3. When reassembling, adjust the image quality ( page 101 ).
• Reassembling
• Apply toner to the edge of the new cleaning blade when you replace the cleaning blade. This
prevents possible damage to the OPC drum and blade.
1. After installing the cleaning blade, remove some of the toner from the old blade with
your finger.
2. Apply the toner to the edge [B] of the new cleaning blade. Make sure to apply the toner
evenly along full length of the new cleaning blade.
4. Replacement and Adjustment
98